High Power Extended C-Band and Extended L-Band DWDM EDFA
Amonics Extended C-band and Extended L-band DWDM Erbium-doped Fiber Amplifier (EDFA) can provide output power up to 30 dBm and 27 dBm respectively. The product adopts the design of high-power pump laser and high stability pump combiner, which has the characteristics of high output power, high gain and very low noise. The amplified power can be evenly distributed with high signal-to-noise ratio in each channel even when there are more channels. In order to deal with massive data transmission in complex communication system, the number of channels of DWDM erbium-doped fiber amplifier is required to be more. This product is an ideal choice for various strict applications.
Specifications
| AEDFA-C-EX-DWDM-27 | AEDFA-C-EX-DWDM-30 | AEDFA-L-EX2-DWDM-27-R | |
|---|---|---|---|
| Composite Output Power | Min. 26dBm, Typ. 27dBm @ 0 dBm input power | Min. 29dBm, Typ. 30dBm @ 0 dBm input power | Min. 26dBm, Typ. 27dBm @ +2 dBm input power |
| Composite input power | -6 to +6 dBm | -6 to +6 dBm | -6 to +6 dBm |
| Optical Input Wavelength | 1527 nm to 1567 nm | 1528 nm to 1567 nm | 1570 nm to 1620 nm |
| Gain | Min. 26 dBm, Typ. 27 dBm @ 0 dBm input power | Min. 29 dBm, Typ. 30 dBm @ 0 dBm input power | Min. 25 dBm, Typ. 26 dBm @ +2 dBm input power |
| Noise Figure | Typ. 5.5 dB, Max. 6.0 dB | Typ. 5.5 dB, Max. 6.0 dB | Typ. 7.0 dB, Max. 7.5 dB |
| Gain Flatness (peak to peak) | Typ. 1.0 dB, Max. 2.0 dB | Typ. 1.0 dB, Max. 2.0 dB | Typ. 1.0 dB, Max. 2.0 dB |
| Input & Output Isolation | Min. 30 dB | Min. 30 dB | Min. 30 dB |
| Polarization Dependent Gain | Typ. 0.3 dB, Max. 0.5 dB | Typ. 0.3 dB, Max. 0.5 dB | Typ. 0.3 dB, Max. 0.5 dB |
| Control Mode | ACC, APC, AGC(optional) | ACC, APC, AGC(optional) | ACC, APC, AGC(optional) |
General Parameters
| unit | value | |
|---|---|---|
| Operation Temperature | °C | 0 to +40 |
| Storage Temperature | °C | -10 to +70 |
| Power Supply | VAC | 90 – 240, 47 – 63Hz |
| Benchtop Dimensions | mm | 260(W) x 330(D) x 120(H) |
| 2U Rackmount Dimensions | mm | 485(W) x 360(D) x 90(H) |
| Mechanical Safety Control | Key-lock switch, BNC interlock key | |
| Optical Power Monitoring | Output power, Input power | |
| Remote Control Port | DB-9 female (RS232), Control software included, RJ-45 (TCP/IP Ethernet) (optional) | |
| Protection | Pump laser (TEC) overheat | |
| Optical Connector | FC/APC, FC/UPC, SC/APC, SC/UPC | |
| Optical Fiber | SMF-28 |
Ordering Information
| Product Code |
|---|
| AEDFA-C-EX-DWDM-aa-b-cc or AEDFA-L-EX2-DWDM-aa-R-cc |
| aa: Saturated output power in dBm |
| b: B for Benchtop, R for 19 inch Rackmount |
| cc: FA for FC/APC, FC for FC/UPC, SA for SC/APC, SC for SC/UPC |
Applications
Key Features
| Turnkey device |
| RS232 / Ethernet interface |
| High output power |
| High gain |
| Low noise figure |