半導體光放大器
Amonics SOA is a polarization maintaining optical amplifier with high fiber-to-fiber gain. It is designed for transmitter applications to increase optical launch power to compensate for the loss of other optical devices.
The benchtop version incorporates a user-friendly front panel housing a LCD monitor display, key switch, power control knob and optical connectors. RS232 computer interface is also equipped on the rear panel. 1MHz with 10ns pulse width intensity modulation is available.
The OEM module version is an ideal building block for OEM system integration, especially in optical communication network and CATV applications. It requires only a single +5V power supply.
規格
| ASOA15-16 | ASOA15-PM-28 | ASOA15-13 | ASOA15-PM-14 | |
|---|---|---|---|---|
| Type | In-Line | In-Line | Booster | Booster |
| Operation Wavelength | 1510nm to 1570nm | 1510nm to 1590nm | 1528nm to 1562nm | 1528nm to 1570nm |
| Saturated Output Power (at 3dBm input) | Typ. 5dBm | Min. 6dBm, Typ. 8dBm | Min. 12dBm, Typ. 14dBm | Min. 13dBm, Typ. 16dBm |
| Small Signal Gain at (at -25dBm input) | Min. 16dB | Min. 25dB, Typ. 28dB | Min. 10dB, Typ. 13dB | Min. 12dB, Typ. 14dB |
| Noise Figure (at -25dBm input) | Max. 9dB | Max. 9dB | Typ. 8dB, Max. 9dB | Max. 9dB |
| Gain Ripple with Respect to Wavelength (RMS) | Typ. 0.5dB, Max. 1dB | Max. 2dB | Max. 0.5dB | Max. 1.5dB |
| Polarization Dependent Gain | Typ. 1.5dB | Min. 10dB | Typ. 1.5dB | Min. 10dB |
| 3dB Optical Bandwidth | Typ. 50dB | Min. 40dB, Typ. 45dB | Typ. 55dB | Typ. 60dB |
| Optical fiber | SMF-28 | PM Panda fiber | SMF-28 | PM Panda fiber |
參數
| unit | benchtop | module | |
|---|---|---|---|
| Operation Temperature | °C | 0 to +40 | 0 to +40 |
| Storage Temperature | °C | -10 to +70 | -10 to +70 |
| Power Supply | V | 90 – 240VAC, 47 – 63Hz | 5.0VDC ± 0.1V |
| Dimensions | mm | 260(W) x 330(D) x 120(H) | 150(W) x 100(L) x 18(H) or Customization on request |
| Electrical Connector | NA | 14-pin MIL Socket | |
| Protection | SOA over heat warning | SOA over heat warning | |
| LCD Display | SOA Current (mA) | NA | |
| Control | Keylock switch, output power | NA | |
| Computer Interface | RS232 | NA | |
| Optical Connector | FC/APC, FC/UPC, SC/APC, SC/UPC | FC/APC, FC/UPC, SC/APC, SC/UPC |
選項
| Input and/or Output Isolator: Min. 30dB (standard) or Min. 40dB (high) |
| Intensity Modulation |
訂購信息
| Product Code |
|---|
| ASOA-bb-c-dd or ASOA-PM-bb-c-dd |
| bb: Small Signal Gain in dB |
| c: B for Benchtop case, M for Module case |
| dd: FA for FC/APC, FC for FC/UPC, SA for SC/APC, SC for SC/UPC, NC for Bare fiber |
特點
| Wide wavelength coverage |
| High fiber-to-fiber gain |
| 1MHz with 10ns pulse width in option |
| Compact modulation size avaliable |
| Good spectral stability |
| Good performance cost ratio |